исправлен баг, что НЕ выводилось содержимое доверительного свойства,
если нет ни одной галочки.
Если нет галочек, значит, и доверительных свойств нет. Но пользователю это непонятно.
Поэтому принято пока такое архитектурное решение, выводить содержимое без галочек.
Backport #19516
Within doArchive there is a service goroutine that performs the
archiving function. This goroutine reports its error using a `chan
error` called `done`. Prior to this PR this channel had 0 capacity
meaning that the goroutine would block until the `done` channel was
cleared - however there are a couple of ways in which this channel might
not be read.
The simplest solution is to add a single space of capacity to the
goroutine which will mean that the goroutine will always complete and
even if the `done` channel is not read it will be simply garbage
collected away.
(The PR also contains two other places when setting up the indexers
which do not leak but where the blocking of the sending goroutine is
also unnecessary and so we should just add a small amount of capacity
and let the sending goroutine complete as soon as it can.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: 6543 <6543@obermui.de>
- Backport #19457
- When 3-way merge is enabled for conflict checking, it has a new interesting behavior that it doesn't return any error when it found a conflict, so we change the condition to not check for the error, but instead check if conflictedfiles is populated, this fixes a issue whereby PR status wasn't correctly on conflicted PR's.
- Refactor the mergeable property(which was incorrectly set and lead me this bug) to be more maintainable.
- Add a dedicated test for conflicting checking, so it should prevent future issues with this.
- Ref: Fix the latest error for https://gitea.com/gitea/go-sdk/pulls/579
Co-authored-by: zeripath <art27@cantab.net>
* Don't allow merging PR's which are being conflict checked (#19357)
- Backport of #19357
- When a PR is still being conflict checked, don't allow the PR to be merged(the merge button could already be visible before e.g. a new commit was pushed to the PR).
- Resolves#19352
* Update error message
Backport #19261
Unfortunately #18789 disabled autoregistration using email addresses as they would
be shortcut to email address does not exist.
This PR attempts to restore autoregistration by allowing an unknown email address
to percolate through to the autoregistration path of UserSignin.
Fix#19256
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19271
Fix:
* The API does ignore issue dependencies where Web does not
* The API checks if "IsSignedIfRequired" where Web does not - UI probably do but nothing will some to craft custom requests
* Default merge message is crafted a bit different between API and Web if not set on specific cases ...
* Use full output of git show-ref --tags to get tags for PushUpdateAddTag (#19235)
Strangely #19038 appears to relate to an issue whereby a tag appears to
be listed in `git show-ref --tags` but then does not appear when `git
show-ref --tags -- short_name` is called.
As a solution though I propose to stop the second call as it is
unnecessary and only likely to cause problems.
I've also noticed that the tags calls are wildly inefficient and aren't using the common cat-files - so these have been added.
I've also noticed that the git commit-graph is not being written on mirroring - so I've also added writing this to the migration which should improve mirror rendering somewhat.
Fix#19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* fix rebase relict
Co-authored-by: 6543 <6543@obermui.de>
Backport #19234
There is a bug in the system webhooks whereby the active state is not checked when
webhooks are prepared and there is a bug that deactivating webhooks do not prevent
queued deliveries.
* Only add SystemWebhooks to the prepareWebhooks list if they are active
* At the time of delivery if the underlying webhook is not active mark it
as "delivered" but with a failed delivery so it does not get delivered.
Fix#19220
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19217
If a mirror fails to be synchronised it should be pushed to the bottom of the queue
of the awaiting mirrors to be synchronised. At present if there LIMIT number of
broken mirrors they can effectively prevent all other mirrors from being synchronized
as their last_updated time will remain earlier than other mirrors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Hide sensitive content on admin panel progress monitor (#19218)
Sanitize urls within git process descriptions.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Do not include global arguments in process manager (#19226)
Backport #19226
The git command by default adds a number of global arguments. These are not
helpful to be displayed in the process manager and so should be skipped for
default process descriptions.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Backport #19149
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: a1012112796 <1012112796@qq.com>
Backport #19169
Unfortunately many email readers will (helpfully) detect url or url-like names and
automatically create links to them, even in HTML emails. This is not ideal when
usernames can have dots in them.
This PR tries to prevent this behaviour by sticking ZWJ characters between dots and
also set the meta tag to prevent format detection.
Not every email template has been changed in this way - just the activation emails but
it may be that we should be setting the above meta tag in all of our emails too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19140
The adoption page checks directories to see if they are repositories by querying the
db on a per user basis. This can lead to problems if a user has a large number of
repositories or putative repositories.
This PR changes the buffering to check the db in IterataeBufferSize batches instead.
Fix#19137
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19131
Backport #19142
Emails should not be sent to inactive users except for Activate and ResetPassword
messages.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19132
Make SKIP_TLS_VERIFY apply to git data migrations too through adding the `-c http.sslVerify=false` option to the git clone command.
Fix#18998
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19045
Yet another issue has come up where the logging from SyncMirrors does not provide
enough context. This PR adds more context to these logging events.
Related #19038
Signed-off-by: Andrew Thornton <art27@cantab.net>
`authenticator.Authenticate` has assume the login name is not an email, but `username` maybe an email. So when we find the user via email address, we should use `user.LoginName` instead of `username` which is an email address.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use email_address table to check user's email when login with email adress
* Update services/auth/signin.go
* Fix test
* Fix test
* Fix logging in with ldap username != loginname
* Fix if user does not exist yet
* Make more clear this is loginName
* Fix formatting
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Johan Van de Wauw <johan@gisky.be>
Co-authored-by: zeripath <art27@cantab.net>
* Prevent dangling GetAttribute calls
It appears possible that there could be a hang due to unread data from the
repo-attribute command pipes. This PR simply closes these during the defer.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move close into the defer
Signed-off-by: Andrew Thornton <art27@cantab.net>
* lets try again
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Restart zero worker if there is still work to do (#18658)
Backport #18658
It is possible for the zero worker to timeout before all the work is finished.
This may mean that work may take a long time to complete because a worker will only
be induced on repushing.
Also ensure that requested count is reset after pulls and push mirror sync requests and add some more trace logging to the queue push.
Fix#18607
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/queue/workerpool.go
Backport #18566
Gitea will currrently resend the same message-id for the closed/merged/reopened
messages for issues. This will cause the merged message to leap to the top of an
email chain and become out of sync.
This PR adds specific suffices for these actions.
Fix#18560
Signed-off-by: Andrew Thornton <art27@cantab.net>
Artur Galyamov
Сергей Аксенов
Алексей Безбородов
Gitea
99rgosse
wxiaoguang
6543
Jimmy Praet
Lunny Xiao
zeripath
Gusted
techknowlogick